Ti-powder
■It will be transferred to Toho Titanium Co., Ltd. on January 1, 2025.
Ti-powder of Toho Technical Service Co., LTD
Toho Technical Service Co., Ltd. manufactures high-quality Ti-powder made from high quality sponge Titanium or cut chips of pure Titanium by dehydrogenated method.
With a low level of oxygen content by cutting fine powder, which will enable you to design parts more flexibly and improve the quality of real density of sintered ones. And also, many customers have been satisfied with stable particle size distribution.
Both of Ti powder and hydrogenated powder begins with hydrogenating Ti material, with the hydrogenated material embrittled, and the particle size is adjusted Dehydrogenated powder is Ti-powder, and non-dehydrogenated powder is hydrogenated powder.
Hydrogenated powder contains H2 about 4% (weight), and will be shipped in stable quality.
We supply mainly both of -45μm and -150μm. For more details, please refer to product specification. Also as developed products, we started supplying blended 64 alloy Ti powder, which is manufactured by dehydrogenated method with64 alloy material.
Ti-powder
| Grade | TC-150、TC-750、TC-450、TC-459、TC+200、 TC-201、TC-15S、TC-45S |
|---|
Hydrogenated powder
| Grade | TCH150、TCH450、TSH150、TSH450 |
|---|
64-alloy powder
| Grade | ACA150、ACA450、ACM150、ACA+20 |
|---|
We are pleased to correspond to inquiry about titanium, so please do not hesitate to contact us.
We will make proper proposals to customer's demand.
Technical information in this website is shown as typical characteristics of product. It does not mean guarantee.
Please note that we are not responsible for damage caused by incorrect or inappropriate use of technical information described on this site.
The information on this site may be subject to change without notice.